Experiment 1         Experiment 2         Experiment 3         Experiment 4

Experiment 2 : Measuring of Guide Wavelenght, lH         Result          M1  = _________ mm        M2  = _________ mm        The difference between M1 and M2 is half that of the guide wavelength, in mm.       lH/2 =  | M1. M2|        The measured value for the guide wavelength is then:        lH = _________ mm         Calculate the value of l0 and lH for the frequency value (at 1.25 mm of micrometer screw setting, obtained from the             previous part  of this experiment 'experiment 1') and compare the lH with the measured value.            lo = c / f          lH = lo / Ö [1- (lo /2a)²]        a   = 15.8 mm         * Please go to the discussion section : Discussions

                           Home | About | Objectives | Introduction | Equipments | Exp Instructions | The Experiments | Discussions | Links |
                                                                        

                                      Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 

                            81300 UTM Skudai,  Johor Darul Ta'zim, Malaysia

                                      Send mail to napye@hotmail.com   with questions or comments about this web site.
                                 Copyright © 2002 Mohd Hanafi Iskandar Bin Asnawee. All Rights Reserved.

                    Last modified:  09/04/02

                               This Site is designed in -  and best viewed with   -  Internet Explorer  - " Resolution of 1024 x768 "