![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
Experiment 3 : Voltage Standing Wave Ratio and Standing Wave
Result
1. Measurement of outgoing power, Pva. Vva = mV, Pva = mW
2. Measurement of the reflected power, Pa with terminating
impedance connected. Va = mV, Pa = mW
3. Measurement of reflected power Pvo with open line Vvo = mV, Pvo = mW
4. Measurement of reflected power Pf with a strongly mismatched
line connected Vvf = mV, Pvf = mW Vf = mV, Pf = mW
5. Measurement of the reflected power Pan with a horn antenna
connected. Van = mV, Pan = mW Calculate the power ratios of every component of the reflected to outgoing power as a numeric value, Pa / Pva i.e. the power reflection coefficient, ρ2 and the voltage reflection coefficient, ρ :
ρ a2 = ,
ρ a =
. ρ o2 = , ρ o = . ρ f2 = , ρ f = . ρ an2 = , ρ an = . Calculate the VSWR, s and the inverse standing wave ratio, m:
s a =
, m a =
. s o = , m o = . s f = , m f = .
s an =
, m an =
.
* Please go to the discussion section : Discussions |